DMX ProFusion iS Guía de usuario descargar pdf (Pagina 18)

PROFUSION i S USER GUIDE

Changing the IP Address

Changing the IP address from the title/artist information screen:

STEP 1 Pressthe*buttontoaccesstheControlPanelmenusystem.

STEP 2 Press the NAVIGATION DOWN button until the current line indicator (>) is on Network Control, then

pressthe*button.

STEP 3 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set

Conguration,thenpressthe*button.

Note: The Set Conguration menu option requires an unlock code. If access to the Set Congura-

tion menu option is needed, contact DMX Customer Service.

STEP 4 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set IP

Address,thenpressthe*button.

STEP 5 Press the NAVIGATION UP or DOWN button to set the value for the rst digit of the rst octet (group of

numbers), then press the NAVIGATION RIGHT button to move to the second digit of the rst octet.

Note: IP addresses such as 192.168.1.100 should be entered as 192.168.001.100.

STEP 6 Press the NAVIGATION UP or NAVIGATION DOWN button to set the value for the second digit of the

rst octet, then press the NAVIGATION RIGHT button to move to the third digit of the rst octet.

STEP 7 Press the NAVIGATION UP or NAVIGATION DOWN button to set the value for the third digit of the rst

octet, then press the NAVIGATION RIGHT button to move to the rst digit of the second octet.

STEP 8 Repeatsteps5–7fortheremainingoctets,thenpressthe*buttontoacceptthechange.

It is highly recommended that a connectivity test is performed after changing any network

settings. See Testing the Network Settings for instructions.

Changing the Subnet

Changing the subnet from the title/artist information screen:

STEP 1 Pressthe*buttontoaccesstheControlPanelmenusystem.

STEP 2 Press the NAVIGATION DOWN button until the current line indicator (>) is on Network Control, then

pressthe*button.

STEP 3 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set

Conguration,thenpressthe*button.

Note: The Set Conguration menu option requires an unlock code. If access to the Set Congura-

tion menu option is needed, contact DMX Customer Service.

STEP 4 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set IP

Subnet,thenpressthe*button.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sin comentarios

DMX ProFusion iS Guía de usuario Pagina 18