
3
A client must install four components to receive music via our Digital Broadcast service:
1. Reception Antenna (or dish)
1 The DBS satellite antenna receives, collects and focuses the digital satellite signal onto the antenna’s LNB.
1 The focal point is at the input of the feedhorn and the LNB. The LNB takes out noise interference and amplies
the signal.
1 Although DBS antennas are manufactured in dierent sizes, DMX recommends using a 1 meter dish.
2. Coaxial Cable
1 DMX uses standard RG6 coaxial cable.
1 The cable connects the antenna on the roof to the receiver in the Client’s business.
1 If the cable run is over 150 feet, an in-line amplier may need to be installed.
3. Digital Satellite Receiver (DR501) features:
1 Over 100 music styles available
1 Up to 32 locally controlled dayparts with min/hr/day selectivity programmable with DJ Remote
1 TTA feature with DJ Remote – displays name of song, artist and album.
1 Stereo and mono capability
1 LED channel and status displays
1 Dynamic range compression: adjustable in 8 steps up to 40dB compression.
1 Single Zone
DMX has three types of Digital Satellite Receivers in the eld, the DR 200, DR 500 and DR 501. The DR501 is the
most current model and will be used for new installations. The receivers have similar functionality and are compat-
ible with one another.
4. Sound System—some type of sound system must be installed or in place with amplier and speakers.
1 The receiver connects into the Client’s sound system the same way a CD player would connect into it.
Zoning
Zoning is used when a client wants to play dierent DMX channels in dierent areas of their business at the same
time. Each dierent area is referred to as a “zone”.
One Zone
A standard set-up is used when the client requires only one receiver or “one-zone” of DMX. In this case, the Client
would use a single DMX Digital Satellite Receiver.
Retail Site
DR501
COAX CABLE
Comentarios a estos manuales